Automatic rewinding machine
For the highest speed production of catering rolls
The automatic rewinding machine model 141 produces long length aluminum foil, plastic film and baking paper rolls for catering uses. Designed for the maximum output at the highest efficiency of both plastic film and aluminum rolls. The use of electronic devices that recover energy in the machine maximizes energy savings.
Technical data | |
141.4 (4 spindles) | |
Outer diameter of aluminum or paper mother rolls: | 1,000 mm max |
Inner diameter of aluminum or paper mother rolls: | 150 mm (other diameters on request) |
Outer diameter of plastic film mother rolls: | 500 mm max |
Inner diameter of plastic film mother rolls: | 76,2 mm (other diameters on request) |
Material width: |
280 ÷ 460 mm (141.4/470) 400 ÷ 610 mm (141.4/620) |
Material thickness: | 9 ÷ 23 μm |
Length of finished rolls: | 30 - 500 m |
Outer diameter of finished rolls: | 100 mm max |
Inner diameter of cores: | 25 ÷ 45 mm |
Lenght of cores: |
290 ÷ 470 mm (141.4/470) 410 ÷ 620 mm (141.4/620) |
Rewinding speed: | up to 900 m/min |
Number of cycles: | up to 30 1/min - up to 10 1/min with labelling device for short labels ON |
Absorbed power: | 20 kW Max |
Electric power supply: | 400 V, 50 Hz, 3 ph + 0 + E (other on request) |
Compressed air: | 0,5 - 0,8 Mpa |
Overall dimensions L x W x H: | 3,300 x 2,300 x 2,300 mm approx. |
Weight: | 3,200 Kg approx. |
Number of spindles on turret: | 4 driven + 4 idle |
N.1 cantilever expansion shaft for plastic film mother rolls: | Included |
Mechanical starting device (glueless attachment): | Included |
Hot-melt unit: | Included |
Labelling unit: | On request |
Perforation unit for plastic film: | On request |
Curling unit for plastic film: | On request |
Embossing unit (steel to rubber) for aluminum foil: | On request |
Conveyor and accumulator belt for finished rolls: | On request |
Micro-embossing unit (steel to wool paper) for aluminum foil: | Not available |
Devices for factory fault diagnosis and remote assistance: | Included |
Mechanical output | ||
Aluminum foil: | 30 m x 30 cm x 10/13 μm: | 1,100 pcs/h |
Aluminum foil: | 150 m x 30 cm x 10/13 μm: | 250 pcs/h |
Aluminum foil: | 300 m x 30 cm x 10/13 μm: | 120 pcs/h |
PVC/PE film: | 30 m x 30 cm x 8/12 μm: | 1,300 pcs/h |
PVC/PE film: | 300 m x 30 cm x 8/12 μm: | 140 pcs/h |